Bantam Mole
Description
The Bantam Mole was designed for installing low voltage wire and invisible dog fence. It is built on the Bededger Bantam frame and is powered with a Honda GX200 engine (approximately 6hp) or Kohler CH270 (7hp) engine. This machine digs the trench, lays the wire in the trench and then covers the trench, all in one operation. The ideal machine for laying low voltage wire 7 inches deep and invisible dog fence 3.5″ deep.
1-year limited warranty: Commercial and Rental
Rotor is fully enclosed for safety
Minimum turf damage
Rubber hood for easy dirt build up removal
Pull unit, allowing legs to do the work
Remove one nut to change rotor
Light weight: 125 pounds
Maneuverable for making turns
Installs wire up to 30 feet per minute, depending on soil conditions
Low profile for maximum stability
Rotor fully enclosed for safety
Clutch lever cuts power to rotor for safety
Models
Model B-765
Bantam Mole
The Model B-765 combines maneuverability and power with a lightweight compact design for easy handling. It features a reliable 6 hp Honda engine.
Specs
Engine: Honda GX200
Weight: 125 lbs
Wheels: Steel with Pneumatic Tires
Rotor Points: Tungsten Carbide
Drive: Double Belt and Pulley System
Rate: 10 to 30 ft. Per Min
Depth: 3-1/2 to 7 inches*
Ship By: Motor Freight (Pre-Assembled)
*Dependent on soil conditions and/or rotor choice
Model B-770
Bantam Mole
The Model B-770 combines maneuverability and power with a lightweight compact design for easy handling. It features a reliable 7 hp Kohler engine.
Specs
Engine: Kohler CH270 7HP Commercial
Weight: 125 lbs
Wheels: Steel with Pneumatic Tires
Rotor Points: Tungsten Carbide
Drive: Double Belt and Pulley System
Rate: 10 to 30 ft. Per Min
Depth: 3-1/2 to 7 inches*
Ship By: Motor Freight (Pre-Assembled)
Weight: 125 lbs
Wheels: Steel with Pneumatic Tires
Rotor Points: Tungsten Carbide
Drive: Double Belt and Pulley System
Rate: 10 to 30 ft. Per Min
Depth: 3-1/2 to 7 inches*
Ship By: Motor Freight (Pre-Assembled)
*Dependent on soil conditions and/or rotor choice
Model B590H-DI/
B595K-DI
Drip Irrigation Installer
The Model B-590DI provides the lightweight maneuverability and power you need while bed edging or redefining. Features 9 HP Honda or 9.5 HP Kohler Engine. Interchangeable rotors provide versatility in digging depth. This unit installs drip irrigation tubing and covers the trench in ONE PASS.
Specs
Engine: Honda 9 HP or Kohler 9.5 HP
Weight: 145 lbs
Wheels: Steel with Pneumatic Tires
Points: Tungsten Carbide
Drive: Double Belt and Pulley System
Rate: Bed Edging: 10 to 30 ft. Per Min
Depth: 3-1/2, 4-1/2 and 5 inches*
Ship By: Motor Freight (Pre-Assembled)
Weight: 145 lbs
Wheels: Steel with Pneumatic Tires
Points: Tungsten Carbide
Drive: Double Belt and Pulley System
Rate: Bed Edging: 10 to 30 ft. Per Min
Depth: 3-1/2, 4-1/2 and 5 inches*
Ship By: Motor Freight (Pre-Assembled)
*Dependent on soil conditions and/or rotor choice
Model B790H-CL/
B795K-CL
Bantam Cable Layer
The Model B-590CL is lightweight and maneuverable making it the perfect choice for installing underground wiring. The 9 HP Honda or 9.5 HP Kohler Engine give it power and reliability. Interchangeable rotors provide versatility in digging depth. The Bantam Cable Layer digs 5 1/2″ or 7″ deep and 2″ wide, lays cable in the trench and covers it.
Specs
Engine: Honda 6.5 HP or Kohler 9.5 HP
Weight: 145 lbs
Wheels: Steel with Pneumatic Tires
Points: Tungsten Carbide
Drive: Double Belt and Pulley System
Rate: Bed Edging: 10 to 30 ft. Per Min
Depth: 5-1/2 and 7 inches*
Ship By: Motor Freight (Pre-Assembled)
Weight: 145 lbs
Wheels: Steel with Pneumatic Tires
Points: Tungsten Carbide
Drive: Double Belt and Pulley System
Rate: Bed Edging: 10 to 30 ft. Per Min
Depth: 5-1/2 and 7 inches*
Ship By: Motor Freight (Pre-Assembled)
*Dependent on soil conditions and/or rotor choice